 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TS3021-3022 Rail-to-rail 1.8V high-speed comparator Features Propagation delay: 33ns Low current consumption: 64A Rail-to-rail inputs Push-pull outputs Supply operation from 1.8V to 5V Wide temperature range: -40C to +125C ESD tolerance: 2kV HBM / 200V MM Latch-up immunity: 200mA SMD packages TS3021 SOT23-5 / SC70-5 Pin connections (top view) OUT Vcc1 2 + IN+ 3 4 IN5 Vcc+ Applications Telecom Instrumentation Signal conditioning High-speed sampling systems Portable communication systems TS3022 SO8 / MiniSO8 Description The TS3021/2 single and dual comparators feature high-speed response time with rail-to-rail inputs. Specified from 2V to 5V supply voltage, these comparators can operate over a wide temperature range: -40C to +125C. The TS3021/2 comparators offer micropower consumption as low as a few tens of microamperes thus providing an excellent ratio of power consumption current versus response time. The TS3021/2 include push-pull outputs and are available in small packages (SMD). Pin connections (top view) Output 1 Inverting Input 1 Non Inverting Input 1 VDD 1 2 3 4 _ + _ + 8 7 6 5 VCC Output 2 Inverting Input 2 Non Inverting Input 2 February 2007 Rev 3 1/17 www.st.com 17 Contents TS3021-3022 Contents 1 2 3 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 SOT23-5 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 SC70-5 (SOT323-5) package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SO8 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 MiniSO8 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4 5 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2/17 TS3021-3022 Absolute maximum ratings and operating conditions 1 Absolute maximum ratings and operating conditions Table 1. Symbol VCC VID VIN Absolute maximum ratings Parameter Supply voltage(1) Differential input voltage Input voltage range Power dissipation(3) SC70-5 SOT23-5 SO8 MiniSO8 Storage temperature Junction temperature Lead temperature (soldering 10 seconds) Human body model (HBM) Machine model (MM) Latch-up immunity (2) Value 5.5 5 VDD-0.3 to VCC+0.3 260 500 1000 650 -65 to +150 150 260 2000 Unit V V V PD mW Tstg Tj TLEAD ESD(4) C C C V 200 200 mA 1. All voltage values, except differential voltage, are referenced to VDD. 2. The magnitude of input and output voltages must never exceed the supply rail 0.3V. 3. Short-circuits can cause excessive heating and destructive dissipation. PD is calculated with Tamb=+25C, Tj =+150C and Rthja = 478C/W for SC70-5, Rthja = 250C/W for SOT23-5, Rthja = 125C/W for SO8, Rthja = 190C/W for MiniSO8. 4. ESD tolerances are compliant with MIL883C, JEDEC STANDARD JESD22, ANSI/ESD STM5.1-2001. Table 2. Symbol Tamb VCC Operating conditions Parameter Ambient temperature Supply voltage 0C < Tamb < +125C -40C < Tamb < +125C Common mode input voltage range -40C < Tamb < +85C +85C < Tamb < +125Tamb Thermal resistance junction to ambient SC70-5 SOT23-5 SO8 MiniSO8 Value -40 to +125 1.8 to 5 2 to 5 VDD-0.2 to VCC+0.2 VDD to VCC 478 250 125 190 Unit C V Vicm V Rthja(1) C/W 1. For a 4-layer PCB. 3/17 Electrical characteristics TS3021-3022 2 Table 3. Symbol VIO VIO IIO IIB Electrical characteristics VCC=+2V, Tamb = +25C, full Vicm range (unless otherwise specified)(1) Parameter Input offset voltage Input offset voltage drift Input offset current(2) Input bias current(2) Test conditions -40C < Tamb < +125C -40C < Tamb < +125C -40C < Tamb < +125C -40C < Tamb < +125C No load, output low, Vicm=0V -40C < Tamb < +125C ICC Supply current No load, output high, Vicm=0V -40C < Tamb < +125C ISC VOH VOL Short-circuit current Output voltage high Output voltage low Source Sink Isource=1mA -40C < Tamb < +125C Isource=1mA -40C < Tamb < +125C VCC= 2 to 5V Vicm= 0V, f=10kHz, CL=50pF, Overdrive = 20mV Overdrive = 100mV Vicm= 0V, f=10kHz, CL=50pF, Overdrive = 20mV Overdrive = 100mV , f=10kHz, CL=50pF, RL=10k Overdrive = 100mV , f=10kHz, CL=50pF, RL=10k Overdrive = 100mV 1.88 1.80 58 64 12 13 1.94 50 67 69 39 33 39 33 8 9 90 125 100 150 75 60 75 60 mA V mV dB dB ns Min. Typ. 0.5 3 1 80 75 Max. 8 10 20 20 100 160 300 105 115 A Unit mV V/C nA nA CMRR Common mode rejection ratio 0 < Vicm < 2V SVR TPLH Supply voltage rejection Propagation delay Low to high output level Propagation delay High to low output level Fall time Rise time TPHL - ns TF TR - ns ns 1. All values at non-ambient temperatures are guaranteed through correlation and simulation. No production test is performed at non-ambient temperatures. 2. Maximum values include unavoidable inaccuracies of the industrial test. 4/17 TS3021-3022 Table 4. Symbol VIO VIO IIO IIB Electrical characteristics VCC=+3.3V, Tamb = +25C, full Vicm range (unless otherwise specified)(1) Parameter Input offset voltage Input offset voltage drift Input offset current(2) Input bias current(2) Test conditions -40C < Tamb < +125C -40C < Tamb < +125C -40C < Tamb < +125C -40C < Tamb < +125C No load, output low, Vicm=0V -40C < Tamb < +125C Min. Typ. 0.5 3 1 80 77 No load, output high, Vicm=0V -40C < Tamb < +125C 65 33 28 3.26 30 71 69 42 34 41 34 5 7 90 125 80 150 85 65 80 65 mA V mV dB dB ns Max. 8 10 20 20 100 160 300 110 120 A Unit mV V/C nA nA ICC Supply current ISC VOH VOL Short circuit current Output voltage high Output voltage low Source Sink Isource=1mA -40C < Tamb < +125C Isource=1mA -40C < Tamb < +125C 0 < Vicm < 3.3V VCC= 2 to 5V Vicm= 0V, f=10kHz, CL=50pF, Overdrive = 20mV Overdrive = 100mV Vicm= 0V, f=10kHz, CL=50pF, Overdrive = 20mV Overdrive = 100mV f=10kHz, CL=50pF,RL=10k , Overdrive = 100mV , f=10kHz, CL=50pF,RL=10k Overdrive = 100mV 3.20 3.10 58 - CMRR Common mode rejection ratio SVR TPLH Supply voltage rejection Propagation delay Low to high output level Propagation delay High to low output level Fall time Rise time TPHL - ns TF TR - ns ns 1. All values at non-ambient temperatures are guaranteed through correlation and simulation. No production test is performed at non-ambient temperatures. 2. Maximum values include unavoidable inaccuracies of the industrial test. 5/17 Electrical characteristics Table 5. Symbol VIO VIO IIO IIB TS3021-3022 VCC=+5V, Tamb = +25C, full Vicm range (unless otherwise specified)(1) Parameter Input offset voltage Input offset voltage drift Input offset current(2) Input bias current(2) Test conditions -40C < Tamb < +125C -40C < Tamb < +125C -40C < Tamb < +125C -40C < Tamb < +125C No load, output low, Vicm=0V -40C < Tamb < +125C Min. Typ. 0.5 3 1 80 80 No load, output high, Vicm=0V -40C < Tamb < +125C 67 62 47 4.80 4.70 58 4.87 110 72 69 48 38 46 38 4 4 95 135 180 250 105 75 95 75 mA V mV dB dB ns Max. 8 10 20 20 100 160 300 115 125 A Unit mV V/C nA nA ICC Supply current ISC VOH VOL Short circuit current Output voltage high Output voltage low Source Sink Isource=4mA -40C < Tamb < +125C Isource=4mA -40C < Tamb < +125C 0 < Vicm < 5V VCC= 2 to 5V Vicm= 0V, f=10kHz, CL=50pF, Overdrive = 20mV Overdrive = 100mV Vicm= 0V, f=10kHz, CL=50pF, Overdrive = 20mV Overdrive = 100mV f=10kHz, CL=50pF,RL=10k , Overdrive = 100mV , f=10kHz, CL=50pF,RL=10k Overdrive = 100mV CMRR Common mode rejection ratio SVR TPLH Supply voltage rejection Propagation delay Low to high output level Propagation delay High to low output level Fall time Rise time TPHL - ns TF TR - ns ns 1. All values at non-ambient temperatures are guaranteed through correlation and simulation. No production test is performed at non-ambient temperatures. 2. Maximum values include unavoidable inaccuracies of the industrial test. 6/17 TS3021-3022 Electrical characteristics Figure 1. Current consumption vs. power supply voltage Figure 2. Current consumption vs. power supply voltage Figure 3. Current consumption vs. power supply voltage Figure 4. Current consumption vs. power supply voltage Figure 5. Output voltage vs. source current VCC=2V Figure 6. Output voltage vs. sink current VCC=2V 7/17 Electrical characteristics TS3021-3022 Figure 7. Output voltage vs. source current VCC=3.3V Figure 8. Output voltage vs. sink current VCC=3.3V Figure 9. Output Voltage vs. source current VCC=5V Figure 10. Output voltage vs. sink current VCC=5V Figure 11. Input offset voltage vs. temperature Figure 12. Input bias current vs. temperature and common mode voltage and input voltage 8/17 TS3021-3022 Electrical characteristics Figure 13. Current consumption vs. commutation frequency 800 VICM= 0V 700 600 500 VCC= 5V VCC= 3.3V VCC= 2V Figure 14. Propagation delay vs. overdrive VCC=2V ICC (uA) 400 300 200 100 0 10k 100k Frequency (Hz) 1M Figure 15. Propagation delay vs. overdrive VCC=2V Figure 16. Propagation delay vs. overdrive VCC=2V Figure 17. Propagation delay vs. overdrive VCC=3.3V Figure 18. Propagation delay vs. overdrive VCC=3.3V 9/17 Electrical characteristics TS3021-3022 Figure 19. Propagation delay vs. overdrive VCC=3.3V Figure 20. Propagation delay vs. overdrive VCC=5V Figure 21. Propagation delay vs. overdrive VCC=5V Figure 22. Propagation delay vs. overdrive VCC=5V Figure 23. Propagation delay vs. temperature VCC=5V, overdrive=100mV Figure 24. Propagation delay vs. common mode voltage, VCC=5V 10/17 TS3021-3022 Package information 3 Package information In order to meet environmental requirements, STMicroelectronics offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an STMicroelectronics trademark. ECOPACK specifications are available at: www.st.com. 11/17 Package information TS3021-3022 3.1 SOT23-5 package mechanical data Dimensions Ref. Min. A A1 A2 b C D E E1 e e1 L 0.35 0.90 0.00 0.90 0.35 0.09 2.80 2.60 1.50 0.95 1.9 0.55 13.7 Millimeters Typ. Max. 1.45 0.15 1.30 0.50 0.20 3.00 3.00 1.75 Min. 35.4 0.00 35.4 13.7 3.5 110.2 102.3 59.0 37.4 74.8 21.6 Mils Typ. Max. 57.1 5.9 51.2 19.7 7.8 118.1 118.1 68.8 12/17 TS3021-3022 Package information 3.2 SC70-5 (SOT323-5) package mechanical data Dimensions Ref Min A A1 A2 b C D E E1 e e1 L 0.10 0.80 0.00 0.80 0.15 0.10 1.80 1.80 1.15 0.65 1.3 0.30 3.9 Millimeters Typ Max 1.10 0.10 1.00 0.30 0.18 2.20 2.40 1.35 Min 31.5 0.0 31.5 5.9 3.9 70.9 70.9 45.3 25.6 51.2 11.8 Mils Typ Max 43.3 3.9 39.4 11.8 7.1 86.6 94.5 53.1 13/17 Package information TS3021-3022 3.3 SO8 package mechanical data Dimensions Ref. Min. A A1 A2 B C D E e H h L k ddd 0.1 5.80 0.25 0.40 1.35 0.10 1.10 0.33 0.19 4.80 3.80 1.27 6.20 0.50 1.27 0.228 0.010 0.016 8 (max.) 0.04 Millimeters Typ. Max. 1.75 0.25 1.65 0.51 0.25 5.00 4.00 Min. 0.053 0.04 0.043 0.013 0.007 0.189 0.150 0.050 0.244 0.020 0.050 Inches Typ. Max. 0.069 0.010 0.065 0.020 0.010 0.197 0.157 14/17 TS3021-3022 Package information 3.4 MiniSO8 package mechanical data Dimensions Ref. Min. A A1 A2 b c D E E1 e K L L1 0 0.40 0.55 0.05 0.78 0.25 0.13 2.90 4.75 2.90 0.10 0.86 0.33 0.18 3.00 4.90 3.00 0.65 6 0.70 0.10 0 0.016 0.022 Millimeters Typ. Max. 1.1 0.15 0.94 0.40 0.23 3.10 5.05 3.10 0.002 0.031 0.010 0.005 0.114 0.187 0.114 0.004 0.034 0.013 0.007 0.118 0.193 0.118 0.026 6 0.028 0.004 Min. Inches Typ. Max. 0.043 0.006 0.037 0.016 0.009 0.122 0.199 0.122 15/17 Ordering information TS3021-3022 4 Ordering information Table 6. Order codes Temperature range Package SOT23-5 SC70-5 -40C, +125C SO8 SO8 MiniSO8 Packaging Tape & reel Tape & reel Tube Tape & reel Tape & reel Marking K520 K52 TS3022I TS3022I K521 Part number TS3021ILT TS3021ICT TS3022ID TS3022IDT TS3022IST 5 Revision history Date 1-Jun-2006 1-Sep-2006 22-Feb-2007 Revision 1 2 3 Initial release. Dual version added. Pin-out of single TS3021 corrected. Modified temperature range for input common mode voltage. Addition of MiniSO8 package for dual version. Changes 16/17 TS3021-3022 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 17/17 |
Price & Availability of TS3022IST
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |